Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 9999

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

(Approval issued by the competent authority of Canada)

Certificate No.: SU 9999 (REN 5)

Certificate Holder: Cesaroni Technology Incorporated

Mode of Transport: Air, Marine, Rail, Road

Issue Date: 2017-02-23

Expiry Date: 2019-02-28

CONDITIONS

This Equivalency Certificate (National Competent Authority Approval) authorizes Cesaroni Technology Inc., the use of the following UN standardized packaging if:

(a) the packaging is UN standardized fiberboard boxes (4G), registered by the Executive Director, Regulatory Frameworks and International Engagement, Regulatory Affairs Branch, Transportation of Dangerous Goods Directorate, Transport Canada, under the Certificate of Registration 36-0893 and the boxes comply with the following Design Registration Numbers:

Design Registration Number

Combination Packaging Design

2-1652

Fiberboard box "A" (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-1653

Fiberboard box "B" (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-1654

Fiberboard box "C" (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

Design Registration Number

Combination Packaging Design

2-1655

Fiberboard box "D" (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-2115

Fiberboard box "E" (ECT 51, flute BC, 171-127-171-127-171 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-2116

Fiberboard box "F" (ECT 51, flute BC, 171-127-171-127-171 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-2117

Fiberboard box "G" (ECT 51, flute BC, 171-127-171-127-171 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-2118

Fiberboard box "H" (ECT 51, flute BC, 171-127-171-127-171 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-2359

Fiberboard box (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Pro-75 fuel grains

2-2360

Fiberboard box (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Pro75 fuel grains

2-2361

Fiberboard box (Mullen 275, flute BC, 205-127-127-127-205 g/m2) for Pro98 fuel grains

2-2467

Fiberboard box "I" (ECT 51, flute BC, 171-127-171-127-171 g/m2) for Hobby Rocket Motor Reload Kits - 24, 29, 38 & 54 mm diameter and 75 & 98 mm diameter fuel grains & TSI Kits

2-3078

Fiberboard box "J" (ECT 51, flute BC, 171-112-171-112-171 g/m2) for Hobby Rocket Motor Reload Kits

(b) the dangerous goods have been classified as:

• UN0351, ARTICLES, EXPLOSIVE, N.O.S., (Rocket Motor Reload Kits), Class 1.4C, Packing Group II,

• UN0351, ARTICLES, EXPLOSIVE, N.O.S., (Ammonium Perchlorate), Class 1.4C, Packing Group II, or

• UN0510, ROCKET MOTORS, CLASS 1.4C, PACKING GROUP II,

by the Chief Inspector of Explosives, Explosives Regulatory Division, Natural Resources Canada as shown in Certificates of Authorization numbers XP2050 C50: 99101501, 02060401, 02112001, 070420001, 070507002, 070829001A, 070829001B, 071116001A, 071116001B, 080725001A, 080725001B, 080904001A, 080904001B, 090313001, 090522002, 090709003, 100317001, 100317002, 100827001, 110616001, 120829001, 070109001, 090522001, and 140528001; and

(c) the shipping document that accompanies the dangerous goods packaged as authorized in this Equivalency Certificate includes the following information legibly and indelibly printed:

"Packaging approved by the Competent Authority of Canada".

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulationsnot specifically addressed in this certificate.

Signature of Issuing Authority

Image in permit

David Lamarche

Chief

Permits and Approvals division


(The following is for information purposes only and is not part of the certificate.)

Contact Person:

Gordon Clarke

Director, Engineering & Regulatory Affairs

Cesaroni Technology Incorporated

GORMLEY Ontario P.O. Box 246
L0H1G0 Canada

Telephone:

905-887-2370

Fax:

905-887-2375

E-mail:

gclarke@cesaroni.net

Explanatory Note

The Transportation of Dangerous Goods Directorate, Transport Canada confirms that the packaging designs registered under the Design Registration Numbers listed in this Equivalency Certificate (National Competent Authority Approval) are deemed to be as equally effective as other packaging for explosives of Class 1 and acceptable to the Canadian Authorities on the basis of test results that exceed those specified in Chapter 6.1 of the UN Recommendations on the Transport of Dangerous Goods for packaging intended for Packing Group II dangerous goods.

An Equivalency Certificate (National Competent Authority Approval) is required as per:

(i) Packing Instruction 101 of Chapter 3, Part 4, of the Technical Instructions for the Safe Transport of Dangerous Goods by Air, which requires packaging approved by the Competent Authority of Canada for air transport,

(ii) Packing Method EP01 of the National Standard of Canada CAN/CGSB 43.151-2012 "Packing, handling, offering for transport and transport of Explosives (Class 1)", which requires packagings approved by the Competent Authority of Canada,

(iii) Packing Instruction P101 of the UN Recommendations on the Transport of Dangerous Goods - Model Regulations, which requires packaging approved by the Competent Authority of Canada,

(iv) Packing Instruction P101 of the International Maritime Dangerous Goods Code, which requires packaging approved by the Competent Authority of Canada for marine transport.

Legend for Certificate Number

SH - Road, SR - Rail, SA - Air, SM - Marine

SU - More than one Mode of Transport

Ren. - Renewal



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19