Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 9749

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

(Approval issued by the competent authority of Canada)

Certificate No.: SH 9749 (Ren. 4)

Certificate Holder: Béton Barrette Inc.

Mode of Transport: Road

Issue Date: March 9, 2016

Expiry Date: June 30, 2018

CONDITIONS

This Equivalency Certificate authorizes Béton Barrette Inc. to handle, offer for transport or transport, and authorizes any person to handle, offer for transport or transport, by road vehicle, dangerous goods that are UN1202, DIESEL FUEL, Class 3, Packing Group III, in a manner that does not comply with subsection 5.14(1) of the Transportation of Dangerous Goods Regulations, under the following conditions:

(a) the dangerous goods are transported in a means of containment integral to motorized equipment (e.g. generators, compressors, heating units, etc.) owned by the certificate holder;

(b) the dangerous goods are intended to be used exclusively as fuel for the operation of the motorized equipment;

(c) means of containment has a capacity less than or equal to 4 000 L;

(d) the Equivalency Certificate number "SH 9749" is visibly and legibly marked on an external surface of the motorized equipment;


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SH 9749 (Ren. 4)

CONDITIONS

(e) the means of containment is visually inspected by the owner or his delegate for evidence of dents, corroded or abraded areas, leakage, or any other condition that might render the tank unsafe for transportation. The owner or his delegate also inspects the means of containment for evidence of involvement in an accident that could affect its lading retention capability. The visual inspection is performed once per calendar year and the date of such inspection is marked on the motorized equipment adjacent to the Equivalency Certificate number;

(f) the means of containment was manufactured on or before July 1, 2012;

(g) the owner provides the Director, Regulatory Affairs Branch, Transportation of Dangerous Goods Directorate, Transport Canada, an inventory of all non-compliant means of containment. For each non-compliant means of containment, a unique identification number and the volume of the means of containment must be included in the inventory;

(h) for means of containment with a capacity greater than 2 000 L but not greater than 4 000 L:

(i) the means of containment is not used to transport dangerous goods after June 30, 2017,

(ii) the motorized equipment owner progressively replaces the means of containment that are currently not in compliance with subsection 5.14(1) of the Transportation of Dangerous Goods Regulationswith compliant means of containment in accordance with the following replacement schedule:

1) 75% of the means of containment must be replaced by June 30, 2016,

2) 100% of the means of containment must be replaced by June 30, 2017,

(iii)the motorized equipment owner produces and retains written records demonstrating the progressive withdrawal from service of means of containment not in compliance with the Transportation of Dangerous Goods Regulations as required in condition (h)(ii) of this certificate.


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SH 9749 (Ren. 4)

CONDITIONS

(i) for means of containment with a capacity greater than 450 L but not greater than 2 000 L:

(i) the means of containment is not used to transport dangerous goods after

June 30, 2018,

(ii) the motorized equipment owner progressively replaces the means of containment that is currently not in compliance with subsection 5.14(1) of the Transportation of Dangerous Goods Regulationswith a compliant means of containment in accordance with the following replacement schedule:

1) 50% of the means of containment must be replaced by June 30, 2016,

2) 75% of the means of containment must be replaced by June 30, 2017,

3) 100% of the means of containment must be replaced by June 30, 2018,

(iii) the motorized equipment owner produces and retains written records demonstrating the progressive withdrawal from service of means of containment not in compliance with the Transportation of Dangerous Goods Regulationsas required in condition (i)(ii) of this certificate.

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulations not specifically addressed in this certificate.

Signature of Issuing Authority

_____________________________

David Lamarche P. Eng., ing.

Chief

Permits and Approvals Division


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SH 9749 (Ren. 4)

(The following is for information purposes only and is not part of this certificate.)

Contact Person: Simon Turcotte

Directeur adjoint opérations de concassage

Béton Barrette Inc.

1000, boulevard Barrette

C.P. 208

Val d'Or QC J9P 4P3

Telephone: 819-825-8112

Facsimile: 819-825-3055

E-mail: simon.turcotte@betonbarrette.qc.ca

Explanatory Note

This Equivalency Certificate allows for transport of diesel fuel intended to be used as fuel for motorized equipment, in non-standardized tanks integral to that motorized equipment, during a transition period during which the non-standardized tanks must be replaced with tanks in accordance with Part 5 of the Transportation of Dangerous Goods Regulations.

These periods of transition apply to tanks manufactured on or before July 1, 2012. All tanks manufactured after July 1, 2012 must comply with Part 5 of the Transportation of Dangerous Goods Regulations and will not benefit from any period of transition.

Diesel fuel tanks having a volume of 450 L or less are still exempt from Part 5 of the Transportation of Dangerous Goods Regulationsunder section 1.33 of the same regulations.

This certificate will not be renewed beyond June 30, 2018.

Legend for Certificate Number

SH - Road, SR - Rail, SA - Air, SM - Marine,

SU - More than one Mode of Transport

Ren. - Renewal



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19