Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 11484

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

Certificate No.: SU 11484

Certificate Holder: Carleton Technologies Inc.

Pressure Technology Division

Mode of Transport: Road, Rail, Air, Marine

Issue Date: August 27, 2014

Expiry Date: August 31, 2019

CONDITIONS

This Equivalency Certificate authorizes Carleton Technologies Inc., Pressure Technology Division to sell, offer for sale, distribute, and deliver in Canada, and authorizes any person to handle, offer for transport, transport, or import into Canada, by road or railway vehicle, by aircraft or by ship, cylinders in a manner that does not comply with sections 5.1 and 5.2, subparagraphs 5.10(1)(a)(ii), 5.10(1)(b)(iii), 5.10(1)(c)(ii), and 5.10(1)(d)(iii), and subsection 5.10(2) of the Transportation of Dangerous Goods Regulations, if:

Selection and Use

(a) subject to condition (b) of this certificate, the requirements applicable to Specification TC-3CCM cylinders in CSA Standard B340-08, "Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2", March 2008, cited in the rest of this certificate as CSA B340-08, are complied with;


Equivalency Certificate

SU 11484

CONDITIONS

(b) cylinder valves shall be permanently and legibly marked with the identification of the thread using the code system specified in CGA TB-16, "Recommended Coding System for Threaded Cylinder Outlets and Threaded Valve Inlets," 2010, published by the Compressed Gas Association Inc., (e.g., "18P") or the complete thread designation (e.g., "M18 × 1,5"). The marking on the valves shall match the thread identification marked on the cylinder. The thread identification shall be visible after the valves are installed in the cylinders;

Manufacture and Requalification

(c) the cylinders are manufactured at 711 Corporate Center Court, Westminster, MD, USAin accordance with the specific procedures, the design qualification test reports, and part number 6166B filed by Carleton Technologies Inc., Pressure Technology Division;

(d) subject to conditions (e) and (f) of this certificate, the cylinders are in compliance with the requirements applicable to Specification TC-3CCM set out in CSA Standard B339-08, "Cylinders, spheres, and tubes for the transportation of dangerous goods", March 2008, cited in the rest of this certificate as

CSA B339-08;

(e) despite the requirements of Clause 4.3.4 of CSA B339-08, straight threads comply with International Standard ISO 15245-1:2001, Gas Cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification, cited in the rest of this certificate as ISO 15245-1, provided that the requirements of Clause 4.3.5 of CSA B339-08 are met;

(f) each cylinder shall be permanently and legibly marked with the identification of the thread using the code system specified in CGA TB-16 (e.g., "18P") or the complete thread designation (e.g., "M18 x 1,5");

Equivalency Certificate

SU 11484

CONDITIONS

This Equivalency Certificate serves as the registration of Carleton Technologies Inc., Pressure Technology Division, pursuant to Clause 25.2 of CSA B339-08, to manufacture cylinders of the designs specified herein. Carleton Technologies Inc., Pressure Technology Division's registered mark, pursuant to CSA B339-08, is:

M4927

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulationsnot specifically addressed in this certificate.

Signature of Issuing Authority

_____________________________

David Lamarche P. Eng., ing.

Chief

Permits and Approvals Division


Equivalency Certificate

SU 11484

(The following is for information purposes only and is not part of this certificate)

Contact Person: Richard Pemberton

Engineering Manager

Cobham Mission Systems Division

Carleton Technologies Inc.

Pressure Technology Division

711 Corporate Centre Court

Westminster MD 21157

USA

Telephone: 410-871-9966 Ext. 110

Facsimile: 410-871-9960

E-mail: richard.pemberton@cobham.com

Explanatory Note

This Equivalency Certificate also authorizes the use of cylinders with internal threads other than those in accordance with North American standards as prescribed in CSA Standard B339. The alternative threads are internationally recognized as being suitable for use in gas cylinders of the designs specified herein. An equivalent level of safety is maintained in this respect by requiring that the thread identification be permanently marked on both the cylinder and the valve.

Legend for Certificate Number

SH - Road, SR - Rail, SA - Air, SM - Marine

SU - More than one Mode of Transport

Ren. - Renewal


Equivalency Certificate

SU 11484

NOTE

Under Canadian Law, a foreign manufacturer of non-specification cylinders cannot be charged with an offence under the Transportation of Dangerous Goods Act, 1992 for failure to comply with the conditions of an Equivalency Certificate. However, certain remedies under the Act are available to Transport Canada in this eventuality.

These include:

1. detention of dangerous goods and consequently the means of containment containing them (subsection 17(1));

2. detention of the means of containment whether full or empty

(subsection 17(1));

3. directions not to import the means of containment or to return them to origin (subsection 17(3));

4. inspectors' directions (section 19);

5. directions to importers of the means of containment to issue notices of defective construction or recall (subsection 9(2)); and

6. revocation of the certificate, thereby making any use of the cylinders an offence (subsection 31(6)).

If none of the foregoing are adequate, Protective Directions may be issued to prohibit or to control the use of the cylinders (section 32).



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19