Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 11277

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

(Approval issued by the competent authority of Canada)

Certificate No.: SU 11277 (Ren. 1)

Certificate Holder: Aevitas Inc.

Mode of Transport: Road, Rail, Marine

Issue Date: August 7, 2015

Expiry Date: August 31, 2017

CONDITIONS

1. This Equivalency Certificate authorizes the Aevitas Inc.,to handle, offer for transport or transport, and authorizes any person to handle or transport on behalf of the certificate holder, by road, railway vehicle or by ship on a domestic voyage, dangerous goods that are UN2315, POLYCHLORINATED BIPHENYLS, LIQUID, regulated only when the concentration is more than 50 ppm, by mass, Class 9, Packing Group II, or UN3432, POLYCHLORINATED BIPHENYLS, SOLID, regulated only when the concentration is more than 50 ppm, by mass, Class 9, Packing Group II, in a manner that does not comply with Part 3 (Documentation), Part 4 (Dangerous Goods Safety Marks), and Part 5 (Means of Containment) ofthe Transportation of Dangerous Goods Regulations, under the following conditions:

(a) the dangerous goods are contained in sealed electrical equipment that:

(i) is designed to perform a function other than solely to contain the PCB mixture,

(ii) is in a leak free condition or is contained to prevent release into the environment,

(iii)contains not more than 500 L of liquid PCB mixture,

(iv)is inspected during transport at intervals not exceeding two hours or 200 km whichever is more frequent,


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 11277 (Ren. 1)

CONDITIONS

(v) is transported in its normal operating position or in a secure manner,

(vi)in the case of equipment that has been drained, the equipment contains the remaining PCB mixture in the base cavity below the drain opening,

(vii) is secured on the means of transport in such a way as to prevent, under normal conditions of transport, damage to the means of containment or to the means of transport that could lead to an accidental release of the dangerous goods;

(b) when the dangerous goods are transported by ship on a domestic voyage, the person accompanying the dangerous goods notifies the master of the ship or the marine carrier of the presence of the dangerous goods and provides to the master, a document that includes the words "marine pollutant" as well as the total quantity of dangerous goods transported;

(c) in addition to the requirements of Part 6 (Training) of the Transportation of Dangerous Goods Regulations, the certificate holder ensures that the personnel handling, offering for transport or transporting the dangerous goods is trained in regards to the conditions of this Equivalency Certificate;

(d) a paper or electronic copy of this Equivalency Certificate accompanies the dangerous goods.

2. This Equivalency Certificate also authorizes Aevitas Inc.,to handle, offer for transport or transport, and authorizes any person to handle or transport on behalf of the certificate holder, by road, railway vehicle or by ship on a domestic voyage, dangerous goods that are UN2315, POLYCHLORINATED BIPHENYLS, LIQUID, regulated only when the concentration is more than 50 ppm, by mass, Class 9, Packing Group II, or UN3432, POLYCHLORINATED BIPHENYLS, SOLID, regulated only when the concentration is more than 50 ppm, by mass, Class 9, Packing Group II, in a manner that does not comply with Part 3 (Documentation), Part 4 (Dangerous Goods Safety Marks), and Part 5 (Means of Containment) ofthe Transportation of Dangerous Goods Regulations, under the following conditions:

(a) the dangerous goods are contained in electrical equipment that :

(i) is used for emergencies as a replacement for stationary equipment,

(ii) is designed to perform a function other than solely to contain PCB,


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 11277 (Ren. 1)

CONDITIONS

(iii)is in a leak free condition or is contained to prevent release into the environment,

(iv)is permanently mounted on a road vehicle,

(v) is secured on the means of transport in such a way as to prevent, under normal conditions of transport, damage to the means of containment or to the means of transport that could lead to an accidental release of the dangerous goods; and

(b) when the dangerous goods are transported by ship on a domestic voyage, the person accompanying the dangerous goods notifies the master of the ship or the marine carrier of the presence of the dangerous goods and provides to the master, a document that includes the words "marine pollutant" as well as the total quantity of dangerous goods transported;

(c) in addition to the requirements of Part 6 (Training) of the Transportation of Dangerous Goods Regulations, the certificate holder ensures that the personnel handling, offering for transport or transporting the dangerous goods is trained in regards to the conditions of this Equivalency Certificate;

(d) a paper or electronic copy of this Equivalency Certificate accompanies the dangerous goods.

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulationsnot specifically addressed in this certificate.

Signature of Issuing Authority

_____________________________

David Lamarche P. Eng., ing.

Chief

Permits and Approvals Division


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 11277 (Ren. 1)

(The following is for information purposes only and is not part of the certificate.)

Contact Person: Barry Boughen

Fleet Operations Manager

Aevitas Inc.

75 Wanless Court

Ayr ON N0B 1E0

Telephone: 519-740-1333 ext. 228

Facsimile: 519-740-2320

E-mail: barry@aevitas.ca

Explanatory Note

This Equivalency Certificate allows the applicant to ship PCB's in sealed electrical equipment that is not in compliance with the packaging standards.
The certificate holder is also exempted from the requirements of dangerous goods safety marks, and documentation. Compliance with the Transportation of Dangerous Goods Regulations would require the applicant to drain the oil from the electrical equipment under field conditions that would increase the risk of a spill. The certificate holder has been transporting this type of equipment for many years in a manner that reflects the conditions outlined in this certificate.

Legend for Certificate Number

SH - Road, SR - Rail, SA - Air, SM - Marine

SU - More than one Mode of Transport

Ren. - Renewal



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19