Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 10495

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

(Approval issued by the competent authority of Canada)

Certificate No.: SU 10495 (Ren. 3)

Certificate Holder: G-Shang Metal Corporation

Mode of Transport: Road, Rail, Air, Marine

Issue Date: April 25, 2017

Expiry Date: April 30, 2022

CONDITIONS

This Equivalency Certificate authorizes G-Shang Metal Corporation, to sell, offer for sale, distribute and deliver in Canada, and authorizes any person to handle, offer for transport, transport, or import into Canada, by road or railway vehicle, by aircraft or by ship, cylinders in a manner that does not comply with sections 5.1 and 5.2, subparagraphs 5.10(1)(a)(ii), 5.10(1)(b)(iii), 5.10(1)(c)(ii), and 5.10(1)(d)(iii), and subsection 5.10(2) of the Transportation of Dangerous Goods Regulations, if:

Selection and Use

(a) the requirements applicable to Specification TC-3CCM cylinders in CSA Standard B340-08, "Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2", March 2008, are complied with;


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10495 (Ren. 3)

CONDITIONS

Manufacture and Requalification

(b) the cylinders were manufactured prior to September 1st 2016, by Composite Technology Corporation, Ltd., at 58 Fusiang Lane, Chang-An Road, Tachia District, Taichung City, 43773, Taiwan (R.O.C), in accordance with the specific procedures, the design qualification test reports, and drawing numbers: G410CTP0006802-TC, G410CTP0004801-TC(A), G410CTP0007701-TC or G410CTP0007201-TC. filed by Composite Technology Corporation, Ltd.;

(c) the cylinders are in compliance with the requirements applicable to Specification TC-3CCM cylinders set out in CSA Standard B339-08, "Cylinders, spheres, and tubes for the transportation of dangerous goods", March 2008, cited in the rest of this certificate as CSA Standard B339-08; except that the Transport Canada mark, the specification designation, and the service pressure required to be marked on each cylinder in accordance with Clause 4.18.2 of CSA B339-08 are replaced by "TC‑SU 10495-", followed by the service pressure expressed in bar; and

(d) the cylinders are requalified in accordance with the requirements applicable to Specification TC-3CCM cylinders in CSA Standard B339-08.

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulationsnot specifically addressed in this certificate.

Signature of Issuing Authority

_____________________________

David Lamarche P. Eng., ing.

Chief

Approvals and Special Regulatory Projects


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10495 (Ren. 3)

(The following is for information purposes only and is not part of this certificate.)

Contact Person: Johnson Yih

Manager

G-Shang Metal Corporation

No. 58, Fusiang Lane, Chang-an Road

Dajia Township

Taichung County 437

Taiwan, R.O.C.

Telephone: 886-4-26810950 ext. 14

Facsimile: 886-4-26810951

E-mail: johnsonyih@gsmcylinder.com.tw

Explanatory Note

This Equivalency Certificate allows for the continued use of fully-wrapped carbon-fibre reinforced aluminium-lined cylinders that were manufactured to comply with the TC-3CCM specification, a new cylinder specification authorized by the 2008 edition of CSA Standard B339. The cylinders were previously only authorized by Equivalency Certificate and are not marked in accordance with the TC-3CCM specification.

Legend for Certificate Number

SH - Road, SR - Rail, SA - Air, SM - Marine

SU - More than one Mode of Transport

Ren. - Renewal


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10495 (Ren. 3)

NOTE

Under Canadian Law, a foreign manufacturer of non-specification means of containment cannot be charged with an offence under the Transportation of Dangerous Goods Act, 1992 for failure to comply with the conditions of an Equivalency Certificate. However, certain remedies under the Act are available to Transport Canada in this eventuality.

These include:

1. detention of dangerous goods and consequently the means of containment containing them (subsection 17(1));

2. detention of the means of containment whether full or empty

(subsection 17(1));

3. directions not to import the means of containment or to return them to origin (subsection 17(3));

4. inspectors' directions (section 19);

5. directions to importers of the means of containment to issue notices of defective construction or recall (subsection 9(2)); and

6. revocation of the certificate, thereby making any use of the means of containment an offence (subsection 31(6)).

If none of the foregoing are adequate, Protective Directions may be issued to prohibit or to control the use of the means of containment (section 32).



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19