Government of Canada navigation bar

Symbol of the Government of Canada

Primary site navigation bar

Certificate 10069

Downloadable version

Canadian flag
Transport
Canada
Safety and Security

Transport Dangerous
Goods Directorate
330 Sparks Street
Ottawa, Ontario K1A 0N5
Transports
Canada
Sécurité et sûreté

Direction générale du
transport des marchandises dangereuses
330, rue Sparks
Ottawa (Ontario) K1A 0N5

Equivalency Certificate

(Approval issued by the competent authority of Canada)

Certificate No.: SU 10069 (Ren. 3)

Certificate Holder: Tianjin Tianhai High Pressure Container Co., Ltd.

Mode of Transport: Road, Rail, Air, Marine

Issue Date: April 8, 2015

Expiry Date: January 31, 2020

CONDITIONS

This Equivalency Certificate authorizes Tianjin Tianhai High Pressure Container Co., Ltd., to sell, offer for sale, distribute, or deliver in Canada, and authorizes any person to handle, offer for transport, transport, or import into Canada, by road or railway vehicle, by cargo aircraft, or by cargo ship, cylinders in a manner that does not comply with sections 5.1 and 5.2, subparagraphs 5.10(1)(a)(ii), 5.10(1)(b)(iii), 5.10(1)(c)(ii), 5.10(1)(d)(iii), and subsection 5.10(2) of the Transportation of Dangerous Goods Regulations, if:

Selection and Use

(a) subject to condition (b), the requirements applicable to specification TC‑3AAM cylinders in CSA Standard B340-08, "Selection and use of cylinders, spheres, tubes, and other containers for the transportation of dangerous goods, Class 2", March 2008, cited in the rest of this certificate as

CSA B340-08, are complied with;


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10069 (Ren. 3)

CONDITIONS

(b) cylinder valves are permanently and legibly marked with the identification of the thread using the code system specified in CGA TB-16, Recommended Coding System for Threaded Cylinder Outlets and Threaded Valve Inlets, 2010, published by the Compressed Gas Association Inc. (e.g., 25E) or the complete thread designation (e.g., 25,8 ISO 11363). The thread identification shall be visible after the valves are installed in the cylinders;

Manufacture and Requalification

(c) the cylinders are manufactured at 268 Jinbin Road, Tianjin Port Free Trade Zone, Tianjin, China, in accordance with the specific designs, procedures, and with part numbers TC114-CrMo-000-1, TC114-CrMo-000-2, TC140-CrMo-000-1, TC140-CrMo-000-2, TC140-CrMo-000-3, TC140‑CrMo‑000-4, TC140-CrMo-000-5, TC178-CrMo-002-1, TC178-CrMo-002-2, TC178-CrMo-002-3, TC178-CrMo-002-4, TC178-CrMo-002-5, TC178-CrMo-002-06, TC178‑CRMo-003, TC178-CRMo-003-1, TC108-CRMo-002 or TC140-CrMo-000-6, filed by Tianjin Tianhai High Pressure Container Co., Ltd., with the Transport Dangerous Goods Directorate;

(d) subject to conditions (e) and (f), the cylinders are in conformity with the applicable requirements for Specification TC-3AAM set out in CSA Standard B339-08, "Cylinders, spheres, and tubes for the transportation of dangerous goods", March 2008, cited in the rest of this certificate as CSA B339-08;

(e) despite the requirements of Clause 4.3.4 of CSA B339-08, taper threads comply with one of the following:

(i) threads in accordance with the requirements of International Standard ISO 11363-1:2010,Gas Cylinders -17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications, or

(ii) threads in accordance with the requirements of Deutsches Institut für Normung (DIN) DIN 477-1:2012, Gas cylinder valves for cylinder test pressures up to 300 bar - Part 1: Valve inlet and outlet connections;

provided the strength is not less than that specified for American Standard Pipe Threads (NPT) in accordance with the requirements of US Federal Standard

US-FED-STD-H28 (1978), "Screw-Thread Standards for Federal Services"; and


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10069 (Ren. 3)

CONDITIONS

(f) each cylinder is permanently marked in accordance with Clause 4.18 of

CSA B339-08, except that:

(i) for cylinders manufactured prior to April 1, 2015 only, the Transport Canada mark, the specification designation and the service pressure are replaced with "TC-SU 10069" followed by the service pressure expressed in bar, and

(ii) each cylinder shall be permanently and legibly marked with the identification of the thread using the code system specified in CGA TB-16, "Recommended Coding System for Threaded Cylinder Outlets and Threaded Valve Inlets," 2010, published by the Compressed Gas Association Inc. (e.g., 25E) or the complete thread designation (e.g., 25,8 ISO 11363); and

(g) the certificate holder reports any incident involving loss of contents or failure of the cylinders to the Director, Regulatory Affairs Branch, Transport Dangerous Goods Directorate, Transport Canada.

This Equivalency Certificate serves as the registration of Tianjin Tianhai High Pressure Container Co., Ltd., pursuant to Clause 25.2 of CSA B339-08, to manufacture cylinders of the designs specified herein. Tianjin Tianhai High Pressure Container Co., Ltd.'s, registered mark, pursuant to CSA B339-08, is:

M0706

Note: The issuance of this Equivalency Certificate in no way reduces the certificate holder's responsibility to comply with any other requirements of the Transportation of Dangerous Goods Regulations, the Technical Instructions for the Safe Transportation of Dangerous Goods by Air, the International Maritime Dangerous Goods Code, and the Canadian Aviation Regulationsnot specifically addressed in this certificate.

Signature of Issuing Authority

_____________________________

David Lamarche P. Eng., ing.

Chief

Permits and Approvals Division


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10069 (Ren. 3)

(The following is for information purposes only and is not part of the certificate.)

Contact Person: Wei Tang

Director Engineer

Beijing Tianhai Industry Co., Ltd.

No. 9 Tianying North Road

Chao Yang District, Beijing

China 100023

Telephone: 8610-67383444-438

Facsimile: 8610-87391797

E-mail: Tangw@btic.com.cn

Explanatory Note

This Equivalency Certificate also authorizes the use of cylinders with internal threads other than those in accordance with North American standards as prescribed in CSA Standard B339. The alternative threads are internationally recognized as being suitable for use in gas cylinders of the designs specified herein. An equivalent level of safety is maintained in this respect by requiring that the thread identification be permanently marked on both the cylinder and the valve. Cylinders made to the older edition of this Equivalency Certificate are also marked with the Equivalency Certificate number (SU 10069).

Legend for Certificate Number

SH - Highway, SR - Rail, SA - Air, SM - Marine

SU - More than one Mode of Transport

Ren. - Renewal


Equivalency Certificate

(Approval issued by the competent authority of Canada)

SU 10069 (Ren. 3)

NOTE

Under Canadian Law, a foreign manufacturer of non-specification means of containment cannot be charged with an offence under the Transportation of Dangerous Goods Act, 1992 for failure to comply with the conditions of an Equivalency Certificate. However, certain remedies under the Act are available to Transport Canada in this eventuality.

These include:

1. detention of dangerous goods and consequently the means of containment containing them (subsection 17(1));

2. detention of the means of containment whether full or empty
(subsection 17(1));

3. directions not to import the means of containment or to return them to origin (subsection 17(3));

4. inspectors' directions (section 19);

5. directions to importers of the means of containment to issue notices of defective construction or recall (subsection 9(2)); and

6. revocation of the Certificate, thereby making any use of the means of containment an offence (subsection 31(6)).

If none of the foregoing are adequate, Protective Directions may be issued to prohibit or to control the use of the means of containment (section 32).



The following document is available for downloading or viewing:

To access the Word document (DOC) version you must have a DOC reader installed. If you do not already have such a reader, there are numerous DOC readers available for free download or for purchase on the Internet:

Date modified:
2017-06-19